How to Flash Samsung Galaxy J1

Materials needed:
* Firmware Samsung Galaxy J1 Ace J110G Download

* Software Odin3 v3.10.7 Download

* Samsung USB Driver for Mobile Phone Download

How to Flash Samsung Galaxy J1 Ace:

Extract all the ingredients that have been downloaded.
Install Samsung Driver on computer
Turn off Samsung Galaxy J1 Ace
Go to Download mode Samsung Galaxy J1 Ace by press and hold Volume Down + Home + Power simultaneously until the Warning !! to enter Download Mode Samsung Galaxy J1 Ace, To continue to Download mode press Up volume button once.
Connect Samsung Galaxy J1 Ace to computer using USB cable
Run Odin3 v3.10.7
Make sure the Samsung Galaxy J1 Ace is detected by Odin3 v3.10.7 port ID: COM on box number 1.
Enter the Samsung Galaxy J1 Ace firmware on the AP tab
Click START to start installing the Samsung Galaxy J1 Ace firmware and wait for the process to complete.
If the process of Flash Samsung Galaxy J1 Ace will finish writing PASS
Flash Samsung Galaxy J1 Ace Done.

Related product you might see: